Call 07942616107

100% Response rate

Air Receiver Tank

Our product range includes a wide range of ms 1 kl air receiver tank, ms horizontal air receiver tank, ss horizontal air receiver tank and 100 l horizontal receiver tank.

MS 1 KL Air Receiver Tank

Get Best Quote
Request Callback

₹ 50000 / Piece Get Latest Price

Product Brochure
Storage Volume300 L
MaterialMS
Design Pressure12 bar
Tank OrientationVertical
Pressure Rating(psi)150
Country of OriginMade in India

Minimum order quantity: 1 Piece

1. Purpose / Function

  • Stores compressed air to:

    • Balance demand and supply

    • Reduce compressor cycling

    • Remove moisture/oil via settling

    • Maintain system pressure

2. Capacity

  • Volume: 1000 Liters (1 KL or 1 m³)

  • Orientation: Vertical (standard) or Horizontal (optional)

  • Working Volume: ~950–980 Liters (approx.)

3. Material of Construction

  • Shell & Heads: Mild Steel (IS 2062 or equivalent)

  • Supports: MS legs or saddle supports (based on orientation)

  • External Finish:

    • Sandblasted, primer-coated + industrial enamel or epoxy paint

    • Color: Blue or gray (standard for air systems)

  • Internal Coating (optional): Epoxy lining (if required for corrosion protection)

4. Design Standards

  • IS 2825 / ASME Section VIII Div. 1 (Pressure Vessels)

  • PESO-certified (India) – if required for regulated installations

  • CE / U-stamp – optional (for international compliance)

5. Operating Pressure

  • Design Pressure: 10 bar (standard); can be customized up to 16–20 bar

  • Working Pressure: Typically 7–10 bar

  • Test Pressure: 1.5 × design pressure (hydrostatic)

6. Dimensions (Typical – may vary by manufacturer)

  • Diameter: ~900–1000 mm

  • Height: ~1800–2000 mm (vertical)

  • Shell Thickness: 5–8 mm (based on pressure and code)

  • Head Thickness: 6–10 mm (dished or elliptical)

7. Nozzles & Fittings

  • Inlet / Outlet: 1” or 1.5” BSP/NPT/flanged

  • Drain Valve: Bottom ½” or ¾” (manual or automatic drain)

  • Safety Valve: Sized per ASME (typically set at 10 bar)

  • Pressure Gauge: Dial-type or digital

  • Air Vent: ½” BSP/NPT (top-mounted)

  • Inspection Opening / Manhole: Optional (for cleaning or internal inspection)

8. Mounting & Supports

  • Vertical Tank: 3 or 4 MS legs with base plates

  • Horizontal Tank: MS saddle supports with base mounting holes

9. Optional Features

  • Auto drain valve (float or timer type)

  • Pressure switch

  • Moisture separator/filter before outlet

  • Internal epoxy or zinc lining (for corrosion protection)

  • Level indicator (optional for visible air/oil condensate monitoring)

  • Temperature sensor or probe

10. Applications

  • Compressed air systems in:

    • Manufacturing plants

    • CNC workshops

    • Paint booths

    • Packaging machinery

    • Automotive workshops

  • Acts as a buffer/storage tank to reduce compressor load

Yes! I am interested

MS Horizontal Air Receiver Tank

Get Best Quote
Request Callback

₹ 60000 / Piece Get Latest Price

Product Brochure
MaterialMS
Design Pressure12 bar
Tank OrientationHorizontal
Material GradeIS 2062
Tank CoatingRed Oxide Primer
Compressor Power10 HP
Pressure Rating(psi)150
Mounting TypeSaddle Mounted
Connection Size2 inch
Surface FinishPainted
Country of OriginMade in India
Storage Volume5000 L
Storage Capacity(litre)1000 L

Minimum order quantity: 1 Piece

  1. Tank Type: Horizontal or Vertical High Pressure Storage Tank

  2. Material of Construction: Mild Steel (IS 2062 Grade B or C)

  3. Design Code: ASME Section VIII Div.1 / IS 2825

  4. Design Pressure: Up to 100 bar (as per requirement)

  5. Working Pressure: Typically 80–90% of design pressure

  6. Hydrotest Pressure: 1.5 × Design Pressure

  7. Design Temperature: -10°C to +150°C (typical)

  8. Corrosion Allowance: Minimum 1.5 mm

  9. Radiography: 100% / Spot – Based on critical weld joints

  10. Joint Efficiency: As per welding and code (typically 0.85 – 1.0)

  11. Shell & Head Thickness: As per design calculation

  12. End Closures: Dished / Torispherical / Ellipsoidal Heads

  13. Nozzles: As per process requirement – MS or CS (ASTM A106 Gr. B)

  14. Manhole: Provided – Typically 18" or 24"

  15. Supports: Skirt / Saddle / Leg type based on tank orientation

  16. Welding Process: SMAW / SAW / GTAW

  17. Post Weld Heat Treatment (PWHT): As required by code

  18. NDT Requirements:

    • Visual Testing (VT)

    • Radiography Testing (RT)

    • Dye Penetrant Testing (DPT)

    • Ultrasonic Testing (UT) – if applicable

  19. Surface Preparation: SA 2.5 (Abrasive Blasting)

  20. Painting (External):

    • Primer: Zinc Rich Epoxy

    • Top Coat: Polyurethane / as per client spec

    • DFT: Minimum 200 microns

  21. Internal Coating: None / Epoxy (if fluid is corrosive)

  22. Fittings & Accessories:

    • Pressure Gauge

    • Safety Relief Valve

    • Drain & Vent Nozzles

    • Earthing Lugs

    • Name Plate (SS)

  23. Inspection:

    • By Manufacturer QC

    • Third Party Inspection (if required)

  24. Documentation:

    • GA & Fabrication Drawings

    • Design Calculations

    • WPS/PQR/Welder Qualifications

    • MTCs & Test Reports

    • Hydrotest Certificate

    • Final Documentation Dossier (MDR)

Yes! I am interested

SS Horizontal Air Receiver Tank

Get Best Quote
Request Callback

₹ 125000 / Piece Get Latest Price

Product Brochure
Storage Volume250 L
MaterialSS
Design Pressure12 bar
Tank OrientationHorizontal
Storage Capacity(litre)1500 L
Pressure Rating(psi)100
Country of OriginMade in India

Minimum order quantity: 1 Piece

  1. Tank Type: Horizontal or Vertical High Pressure Storage Tank

  2. Material of Construction: Stainless Steel 

  3. Design Code: ASME Section VIII Div.1 / IS 2825

  4. Design Pressure: Up to 100 bar (as per requirement)

  5. Working Pressure: Typically 80–90% of design pressure

  6. Hydrotest Pressure: 1.5 × Design Pressure

  7. Design Temperature: -10°C to +150°C (typical)

  8. Corrosion Allowance: Minimum 1.5 mm

  9. Radiography: 100% / Spot – Based on critical weld joints

  10. Joint Efficiency: As per welding and code (typically 0.85 – 1.0)

  11. Shell & Head Thickness: As per design calculation

  12. End Closures: Dished / Torispherical / Ellipsoidal Heads

  13. Nozzles: As per process requirement – MS or CS (ASTM A106 Gr. B)

  14. Manhole: Provided – Typically 18" or 24"

  15. Supports: Skirt / Saddle / Leg type based on tank orientation

  16. Welding Process: SMAW / SAW / GTAW

  17. Post Weld Heat Treatment (PWHT): As required by code

  18. NDT Requirements:

    • Visual Testing (VT)

    • Radiography Testing (RT)

    • Dye Penetrant Testing (DPT)

    • Ultrasonic Testing (UT) – if applicable

  19. Surface Preparation: SA 2.5 (Abrasive Blasting)

  20. Painting (External):

    • Primer: Zinc Rich Epoxy

    • Top Coat: Polyurethane / as per client spec

    • DFT: Minimum 200 microns

  21. Internal Coating: None / Epoxy (if fluid is corrosive)

  22. Fittings & Accessories:

    • Pressure Gauge

    • Safety Relief Valve

    • Drain & Vent Nozzles

    • Earthing Lugs

    • Name Plate (SS)

  23. Inspection:

    • By Manufacturer QC

    • Third Party Inspection (if required)

  24. Documentation:

    • GA & Fabrication Drawings

    • Design Calculations

    • WPS/PQR/Welder Qualifications

    • MTCs & Test Reports

    • Hydrotest Certificate

    • Final Documentation Dossier (MDR)

Yes! I am interested

100 L Horizontal Receiver Tank

Get Best Quote
Request Callback

₹ 20000 / Piece Get Latest Price

Product Brochure
Storage Volume300 L
MaterialMS
Design Pressure10 bar
Tank OrientationHorizontal
Storage Capacity(litre)100 L
Pressure Rating(psi)100
Country of OriginMade in India

Minimum order quantity: 1 Piece

  • Type: Horizontal pressure vessel (air/fluid receiver tank)

  • Application: Compressed air storage, pressure stabilization, condensate settlement

  • Mounting: Horizontal with MS saddle supports

  • Capacity: Typically 250L to 20,000L (customizable)

  • Design Pressure: 7 to 12 bar (customizable)

  • Working Pressure: Approx. 6 to 10 bar

  • Test Pressure: 1.5 times the design pressure

  • Design Temperature: -10°C to +100°C (typical)

  • Corrosion Allowance: 1.5 mm (standard)

  • Design Code: ASME Section VIII Div. 1 / IS 2825 / PED / CE / IBR (if required)

  • Material of Construction (MOC):

    • Shell & Dished Ends: Mild Steel IS 2062 / SA 516 Gr. 70

    • Nozzles: MS / CS ASTM A106 Gr. B

    • Flanges: ASTM A105 / IS Standard

    • Gaskets: CAF / Graphite

    • Supports: MS IS 2062

  • Ends: Dished or elliptical heads

  • Manhole: 18” (optional, based on tank size)

  • Nozzles & Connections:

    • Inlet / Outlet

    • Drain nozzle

    • Vent nozzle

    • Safety valve nozzle

    • Pressure gauge port

    • Auto drain valve (optional)

  • Accessories (Optional):

    • Pressure Relief Valve

    • Pressure Gauge

    • Auto Drain Valve

    • Level Indicator

    • Earthing Lug

    • Name Plate (SS or aluminum)

    • Lifting Lugs

  • Surface Preparation:

    • Internal: Bare metal or anti-rust coating (if required)

    • External: Sand/shot blasted to SA 2.5

  • Painting (External):

    • Primer: Zinc-rich epoxy primer

    • Finish Coat: PU or Epoxy

    • Total DFT: 200–250 microns

  • Inspection & Testing:

    • Visual inspection

    • Dimensional check

    • Hydrostatic test at 1.5× design pressure

    • DPT on welds (if required)

    • Third-party inspection (optional)

  • Documentation Provided:

    • GA and fabrication drawings

    • Material Test Certificates (MTCs)

    • Hydrotest reports

    • Inspection & dimensional reports

    • Warranty / Compliance certificates

    • Yes! I am interested
    X

    Product Videos

    SS Vertical Storage Tank

    SS Vertical Storage Tank

    Get Quote

    Contact Us

    Kishan Patel (CEO)
    Tecnicon Engineering Private Limited
    148, Amarnath Industrial Park, Indore Highway Road, Bhavda
    Ahmedabad - 382433, Gujarat, India

    Get Directions
    Send Email
    Share: