Tecnicon Engineering Private Limited

Tank type: Vertical / Horizontal / Open-top / Closed / Pressure-rated / Atmospheric

Total capacity: e.g., 100 L, 1000 L, 5000 L, etc.

Working capacity: Typically 70–90% of total volume

Material of construction (MOC):

• Stainless Steel (SS304 / SS316L)

• Carbon SteelAluminum (rare)

Inner surface finish:

• Ra value (e.g., ≤0.4 µm for sanitary applications)

• Electro-polished / Mechanical polished

External surface finish: Matte / Polished / Painted / Insulated

Design pressure: Atmospheric / Pressurized (e.g., -1 to +3 bar)

Design temperature: e.g., -10°C to 150°C

Operating pressure & temperature

CIP/SIP capability: Yes/No

ASME / PED / GMP compliance: As applicable

Agitator type:

• Anchor / Turbine / Propeller / Paddle / Magnetic stirrer / High-shear mixer

Motor power: e.g., 0.5 HP to 10 HP

Agitator speed: Fixed / Variable (VFD) – RPM range

Drive type: Top-mounted / Bottom-mounted / Side entry

Sealing: Mechanical seal / Lip seal / Magnetic coupling

Impeller type and number

Shape: Cylindrical, conical bottom, dished ends

Head type: Flat / Dished / Conical

Bottom type: Flat / Sloped / Conical / Dish

Support type: Legs / Skirt / Saddle / Frame-mounted

Manhole/handhole

Inlet/outlet nozzles: Size and connection type

Vent nozzle: With or without filter

Drain valve: Type (e.g., ball, butterfly, flush bottom)

Sampling port

Level indicator: Sight glass / Radar / Ultrasonic / Float

Thermowell for temperature probe

Pressure gauge / sensor port

Spare nozzles

Temperature sensor

Level sensor

Pressure sensor (if applicable)

pH or conductivity probe (optional)

Control system: Manual / PLC / SCADA / HMI

Agitator control: On/Off or VFD

Jacketed or non-jacketed

Jacket type: Full / Partial / Dimple / Limpet coil

Medium used: Water, glycol, steam, oil

Insulation type: Mineral wool, polyurethane, etc.

Cladding material: SS, aluminum, FRP

CIP (Clean-in-Place): Yes/No

SIP (Steam-in-Place): Yes/No

Spray ball or rotary jet cleaner: Type, quantity

Power: Voltage, phase, frequency

Steam/thermal oil (if heated)

Chilled water or coolant

Compressed air

Drainage and venting

Skirt support, legs with adjustable pads, or saddle (horizontal tanks)

Anti-vibration pads if needed

ON/OFF or VFD-controlled speed

Start/stop pushbuttons, overload protection

PLC/HMI interface (optional)

Dimple jacket or full shell jacket

Medium: Steam, hot water, or glycol

Insulation: Rockwool/PUF with SS or aluminum cladding

Lifting lugs or forklift pockets (for mobile tanks)

Manual or Clean-in-Place (CIP) system ready

Easy disassembly of agitator and parts (sanitary design)

Hydrostatic test (1.5x design pressure, if applicable)

Agitator run test

Weld visual or NDT (if specified)

Surface roughness check (if required)

Type: Vertical cylindrical tank with jacket and agitator

Function: Mixing, heating/cooling, blending, dissolving, or reaction

Design: Atmospheric or pressure-rated (optional)

Working Volume: 500 L, to 50,000 L, etc.

Total Volume: Typically 10–20% higher than working volume

Tank Body & Internal Contact Parts: SS304 / SS316 / SS316L

Jacket Material: Same as tank body or carbon steel with corrosion protection

Gaskets / Seals: FDA-grade EPDM / PTFE / Silicone (for sanitary use)

Type:

• Dimple jacket

• Half-pipe coil

• Conventional jacket (full or partial)

Design Pressure: Typically 3 to 10 bar (44 to 150 psi)

Service Medium: Steam, hot/chilled water, thermal oil, etc.

Type:

• Top-entry or bottom-entry

• Anchor, paddle, propeller, turbine, or high-shear

Speed: Fixed or variable (VFD-controlled), typically 20–300 RPM

Drive: Electric motor with gearbox or direct drive

Seal: Mechanical seal (single/double), gland packing

Material: Glass wool / Mineral wool / Polyurethane foam

Cladding: SS304 / Aluminum (optional)

Thickness: Typically 50–100 mm depending on thermal requirements

Inlets/Outlets: Product inlet, outlet, CIP spray ball, vent, pressure gauge, thermowell, level sensor, etc.

Manhole: Top or side-mounted for inspection/cleaning

Instrumentation:

• Temperature sensor (RTD/Thermocouple)

• Level transmitter (ultrasonic, radar, float)

• Pressure gauge or transmitter

ASME Section VIII (if pressure rated)

API / DIN / ISO as applicable

GMP / 3A / EHEDG (for food/pharma applications)

Internal Finish: Mirror polished (Ra < 0.4 µm) for sanitary use

External Finish: 2B / Matte / Brushed

Power Supply: e.g., 3-Phase, 380V, 50Hz

Steam/Water Inlet: Jacket service connections

Compressed Air: For actuated valves or instrumentation

Vacuum or pressure operation

CIP/SIP (Clean-in-Place / Sterilize-in-Place)

Load cells for batch weighing

PLC / HMI integration

Explosion-proof motor (ATEX-rated)

ASME Section VIII Div. 1 (for pressure-rated vessels)

cGMP compliance (for pharmaceutical and biotech applications)

FDA / 3A standards (for food and beverage use)

API 650 / 620 (for large or industrial tanks)

Ranges from 50 liters to 50,000 liters (customizable)

Common sizes: 100 L, 500 L, 1000 L, 2000 L, 5000 L

Stainless Steel: SS304, SS316/316L

Carbon Steel (for non-corrosive applications)

Lined Options: Glass, PTFE, rubber

Conventional Jacket (full shell coverage)

Dimple Jacket (spot-welded, efficient heat transfer)

Half-Pipe Coil Jacket (for high-pressure applications)

Limpet Coil (external helical coil)

Agitator Types: Propeller, Turbine, Anchor, Paddle, High-shear

Drive Types: Top-mounted (standard), side or bottom-mounted

Motor: Electric motor with gearbox, optional VFD

Speed: Fixed or variable (typically 10–300 RPM)

Steam

Hot Water

Thermal Oil

Chilled Water

Glycol-Water Mixture

Jacket Working Pressure: 2 to 10 bar (higher for steam)

Tank Pressure: Atmospheric or vacuum-rated

Design Temperature: –20°C to 200°C

Leg Mounted

Skid Mounted

Platform or Floor Mounted

Insulation: Glass wool or polyurethane with SS cladding

Manhole / Access Ports

Sight Glass

CIP/SIP Ports (Clean/Steam In Place)

Instrumentation: Temperature sensors, pressure gauges, level sensors

Discharge Valve: Bottom outlet (butterfly or ball valve)

Internal Surface: Mirror-polished (Ra ≤ 0.4 µm for sanitary applications)

External Surface: Matte, mirror-polished, or painted

Nominal Volume: 0.5 KL (500 Liters)

Working Volume: ~450–480 Liters

Design Type: Vertical cylindrical tank with dished or flat bottom

Material: Stainless Steel SS304 or SS316 / SS316L (as per application)

Internal Finish: Mirror polished (Ra ≤ 0.4–0.8 µm) – for food/pharma

External Finish: Matte or mirror finish

Optional Lining: Not required (SS is corrosion-resistant)

Agitator Type: Anchor, paddle, or propeller (depends on viscosity)

Motor: Electric motor with gearbox

• Power: 0.5 HP to 2 HP (based on mixing requirement)

• Drive: Inline geared motor or VFD-controlled

Speed: Fixed or variable (typically 30–150 RPM)

Mounting: Top-mounted (flanged or bracketed)

Top: Open, closed, or hinged lid (optional manhole)

Bottom: Flat or dished (dished preferred for draining)

Mounting Type: Leg-mounted or skid-mounted with adjustable leveling pads

Support: 3 or 4 stainless steel legs

Jacket Type: Dimple jacket or plain jacket (for heating/cooling)

Heating Medium: Steam, hot water, thermal oil

Cooling Medium: Chilled water, glycol

Insulation: Glass wool or PU foam with SS cladding (optional)

Inlet: 1” or 1.5” (flanged or threaded)

Outlet: 1.5” or 2” with SS ball or butterfly valve

Vent / Breather: 0.5” to 1”

Drain Valve: Bottom outlet (flush-type valve optional)

Instrumentation Ports (Optional):

• Temperature sensor (RTD or thermowell)

• Level sensor

• Pressure gauge (if jacketed/pressurized)

Diameter: ~800 mm to 900 mm

Height: ~1000 mm to 1200 mm (without agitator/motor)

Wall Thickness: 3 mm (shell), 3–4 mm (bottom)

Design Pressure: Atmospheric (standard); pressurized optional

Temperature: Up to 120°C (higher if jacketed and steam-heated)

Working Pressure (if jacketed): 2–4 bar (standard steam rating)

CIP / SIP system nozzles (Clean/Steam In Place)

Sight glass with light

Manhole with clamp or bolted cover

Load cells for weight-based batching

Digital control panel with temperature and speed monitoring

Flameproof motor (for hazardous environments)

Pharmaceutical liquid mixing

Food product blending (milk, syrup, juice)

Cosmetic creams, lotions

Chemical formulation (non-corrosive or mildly corrosive)

Laboratory or pilot-scale processing