Tecnicon Engineering Private Limited

Tank type: Vertical / Horizontal

Application: Water / Chemical / Oil / Pharma / Food-grade

Orientation: Vertical / Horizontal

Installation: Aboveground / Indoor / Outdoor

Total volume

Working volume

Height

Diameter

Wall thickness

Shell/head material: SS304 / SS316 / CS

Internal lining/coating: Epoxy / Rubber / PTFE / Food-grade

External finish: Painted / Polished / Cladded / Insulated

Design code: ASME / API / IS / ISO

Design pressure

Design temperature

Corrosion allowance

Wind/seismic design

Certification: GMP / FDA / CE / ATEX (if applicable)

Type: Tubular / Flat / Full-length window

Mounting: Welded / Flanged / Clamped

Glass material: Borosilicate / Acrylic / Toughened

Level range: Full or partial

Protection: Guard rods / Cage

Backlight/scale: Optional

Cleanability: Easy-clean / Sanitary design

Inlet nozzle

Outlet nozzle

Drain nozzle

Overflow nozzle

Vent/breather nozzle

Sampling port

Manhole / Handhole

Sight glass ports

Thermowell

Support type: Legs / Skirt / Saddle

Anchor bolts

Earthing lug

Sight glass (main level indicator)

Optional level sensor: Radar / Ultrasonic / Magnetic

Temperature sensor

Pressure gauge (if pressurized)

Level alarms: High / Low

Insulation type: Rock wool / PUF  

Thickness

Cladding material: SS / Aluminum / GI

Drain valve type

CIP/SIP system: Yes/No

Spray ball / Rotary cleaner

Sanitary fittings: Tri-clamp / DIN / SMS

Pressure/vacuum relief valve

Emergency vent

Flame arrestor (if required)

Overflow protection

Bund wall (if required)

Sight glass protection

Electrical supply

Compressed air

Steam / Hot water / Chilled water

Gauge lighting (optional)

Material Test Certificates (MTC)

Welding docs: WPS / PQR / Welder certificates

Hydrotest report

NDT reports (if applicable)

Factory Acceptance Test (FAT)

Compliance certificates: CE / GMP / FDA / ATEX

Tank Type: Vertical / Horizontal

Service: (Air, Nitrogen, Water, CO₂, Ammonia)

Capacity: (1000 Liters to 100 m³)

Design Pressure: (0.5 bar, 35 bar)

Design Temperature: (-10°C to +50°C)

Shell Material: (Carbon Steel SA 516 Gr. 70 / SS 304 / SS 316)

Head Type: Ellipsoidal / Hemispherical / Dished End

Corrosion Allowance: (1.5 mm)

Thickness: As per design (ASME / IS / PED)

Internal Lining: Epoxy / Rubber / PTFE (if applicable)

Applicable Codes:

• ASME Sec VIII Div. 1

• IS 2825

• PED 2014/68/EU

• API 650 / API 620 (for low pressure)

Testing Standards: Hydrostatic / Pneumatic tests as per ASME / customer spec

Inlet / Outlet Size and Type: (2” NPT / Flanged 150# RF)

Manhole: (450 mm Dia, top-mounted)

Drain: (1” BSP / NPT at bottom)

Vent: (1” NPT at top)

Pressure Relief Valve Nozzle: (size and rating)

Instrumentation Ports:

• Pressure gauge

• Temperature gauge

• Level gauge / level switches (if applicable)

Support Type: Skirt / Legs / Saddle

Anchor Pads: If required

Foundation Requirements: As per structural drawing

Internal Surface:

• Sandblasted, painted, or coated as required

• Food grade (if SS) or chemical resistant coating (if for chemicals)

External Surface:

• Primer + Finish paint system (epoxy / polyurethane)

• Color code per industry standards (Blue for air, Yellow for fuel)

Safety Relief Valve

Pressure Gauge with Syphon

Level Indicator (if applicable)

Drain Valve / Isolation Valve

Air Vent Valve

Non-Destructive Testing:

• Radiography / Dye Penetrant Test / Ultrasonic (as applicable)

Hydrostatic Test Pressure: 1.3x Design Pressure

Pneumatic Test (if applicable)

Third-party Inspection: (if required – Lloyd’s, BV, TUV)

Material Test Certificates (MTCs)

Pressure Test Report

Welding Procedure Qualification Records (WPQR)

Drawings (General Arrangement & Fabrication)

Operation & Maintenance Manual

Certificate of Conformity (CoC)

Heating Jacket / Coil

Insulation: Type (Glass Wool), Thickness, Cladding

Agitator (for process tanks)

Level Transmitter / Digital Sensors

Skid Mounting (for mobile tanks)