Tecnicon Engineering Private Limited

Tank Type: Atmospheric / Pressurized / Vacuum / Cryogenic
Capacity / Volume: Nominal volume (e.g., 1,000 liters to 50 m³)
Working volume: Dead volume (if applicable)
Tank Orientation: Vertical / Horizontal
Tank Shape: Cylindrical / Rectangular / Spherical / Custom
Material of Construction: Carbon Steel / Stainless Steel (SS304, SS316) / Aluminum
Design Pressure: Internal pressure (e.g., 1.5 bar(g))
External pressure (vacuum rating if applicable)
Design Temperature: Minimum and maximum (e.g., -10°C to +80°C)
Corrosion Allowance: Typically 1.5 mm or as specified
Design Code / Standards: API 650 / API 620 / ASME Section VIII / UL 142 / IS 803
Dimensions: Diameter
Height / Length
Wall/Shell thickness
Roof and bottom thickness
Roof Type: Fixed roof / Floating roof / Domed / Cone 
Bottom Type: Flat / Sloped / Conical / Dish / Hopper
Foundation Type: Ring wall / Slab / Pile / Elevated supports
Nozzles and Openings:
Inlet / Outlet sizes and types
Drain, vent, overflow, sampling, etc.
Flange rating (e.g., ANSI 150#)
Manhole / Access Hatch:
Diameter (e.g., 500 mm)
Quantity and location
Level Measuring System:
Sight glass / Radar / Ultrasonic / Float & tape
Temperature Measuring:
Thermowell, RTD, or Thermocouple
Insulation (if applicable):
Material (e.g., rock wool, PU foam)
Thickness and cladding
Heating / Cooling System (if any):
Steam coils / Electric heater / External jack 
Vent / Breather Valve:
Size and set pressure
Flame arrester (if applicable)
Painting / Coating / Lining:
External paint (epoxy, polyurethane)
Internal lining (rubber, epoxy, glass flake)
Earthing / Lightning Protection:
Required for flammable storage
Safety Accessories:
Pressure relief valves
Emergency vents
Spill containment
Testing and Inspection Requirements:
Hydrotest pressure
Radiography / Ultrasonic